PLOT REPORT
-----------

Report File:        C:\Electronics\Manual Flow Control Board\Manual Flow Control Board 01 (PCB - PLOT REPORT).txt
Report Written:     Tuesday, December 20, 2016
Project Path:       C:\Electronics\Manual Flow Control Board\Manual Flow Control Board 01.prj
Design Path:        C:\Electronics\Manual Flow Control Board\Manual Flow Control Board 01.pcb
Design Title:       
Created:            2016/10/31 11:48:15 AM
Last Saved:         2016/12/20 11:14:56 AM
Editing Time:       2530 min
Units:              mm (precision 2)


Device Settings
===============


Gerber Settings
===============

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    3.5 format absolute inches.    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.
    Hardware arcs allowed.


Drill Settings
==============

    Excellon Format 1    Format 3.5 absolute in mm.
    No zero suppression.


Plots Output
============


Gerber Output
=============

C:\Electronics\Manual Flow Control Board\Plots\Manual Flow Control Board 01 - Top Silkscreen.gbr

    Layers:
    ------------------
    Top Silkscreen
    Board Outlines

    D-Code Shape  (thou)
    -----------------------
    D13    Round 20.00
    D14    Round 3.00
    D15    Round 5.00
    D21    Round 5.91
    D22    Round 3.94
    D23    Round 6.00
    D24    Round 4.72
    D25    Round 7.87
    D26    Round 25.00
    D27    Round 10.00

Gerber Output
=============

C:\Electronics\Manual Flow Control Board\Plots\Manual Flow Control Board 01 - Top Copper.gbr

    Layers:
    ------------------
    Top Copper
    Board Outlines

    D-Code Shape  (thou)
    ------------------------------------------------
    D15    Round 5.00
    D26    Round 25.00
    D28    Round 59.06
    D29    Rectangle 20.00 X 49.00  Rotation 90
    D72    Rectangle 99.00 X 126.00
    D73    Rectangle 102.36 X 137.80  Rotation 90
    D74    Round 86.61
    D75    Rectangle 216.54 X 314.96
    D76    Rectangle 59.06 X 149.00  Rotation 90
    D77    Rectangle 34.00 X 38.00  Rotation 90
    D78    Rectangle 106.30 X 314.96  Rotation 90
    D79    Rectangle 55.12 X 118.11  Rotation 90
    D80    Rectangle 59.06 X 149.00
    D81    Bullet 118.11 X 59.06  Rotation 180
    D82    Round 118.11
    D83    Bullet 118.11 X 59.06
    D84    Rectangle 34.00 X 38.00
    D85    Rectangle 25.59 X 72.83  Rotation 90
    D86    Square 66.00
    D87    Round 66.00
    D88    Square 54.00
    D89    Round 54.00
    D90    Square 78.74
    D91    Round 78.74
    D92    Square 60.00
    D93    Round 64.96
    D94    Rectangle 51.18 X 62.99
    D95    Bullet 118.11 X 59.06  Rotation 90
    D96    Bullet 118.11 X 59.06  Rotation 270
    D97    Rectangle 39.00 X 67.00  Rotation 90
    D98    Square 86.61
    D99    Rectangle 78.74 X 196.85  Rotation 90
    D100   Rectangle 51.18 X 62.99  Rotation 90
    D101   Round 55.91
    D102   Round 50.00
    D103   Round 15.00
    D104   Round 31.89
    D105   Round 23.62

Gerber Output
=============

C:\Electronics\Manual Flow Control Board\Plots\Manual Flow Control Board 01 - Top Copper (Paste).gbr

    Layers:
    ------------------
    Top Copper
    Board Outlines

    D-Code Shape  (thou)
    ------------------------------------------------
    D15    Round 5.00
    D106   Round 55.06
    D107   Rectangle 16.00 X 45.00  Rotation 90
    D108   Rectangle 95.00 X 122.00
    D109   Rectangle 98.36 X 133.80  Rotation 90
    D110   Rectangle 212.54 X 310.96
    D111   Rectangle 55.06 X 145.00  Rotation 90
    D112   Rectangle 30.00 X 34.00  Rotation 90
    D113   Rectangle 102.30 X 310.96  Rotation 90
    D114   Rectangle 51.12 X 114.11  Rotation 90
    D115   Rectangle 55.06 X 145.00
    D116   Bullet 114.11 X 55.06  Rotation 180
    D117   Round 114.11
    D118   Bullet 114.11 X 55.06
    D119   Rectangle 30.00 X 34.00
    D120   Rectangle 21.59 X 68.83  Rotation 90
    D121   Rectangle 47.18 X 58.99
    D122   Bullet 114.11 X 55.06  Rotation 90
    D123   Bullet 114.11 X 55.06  Rotation 270
    D124   Rectangle 35.00 X 63.00  Rotation 90
    D125   Square 82.61
    D126   Rectangle 74.74 X 192.85  Rotation 90
    D127   Rectangle 47.18 X 58.99  Rotation 90

Gerber Output
=============

C:\Electronics\Manual Flow Control Board\Plots\Manual Flow Control Board 01 - Top Solder Mask.gbr

    Layers:
    -------------------
    Top Solder Mask
    Board Outlines

    D-Code Shape  (thou)
    ------------------------------------------------
    D15    Round 5.00
    D82    Round 118.11
    D128   Rectangle 26.30 X 55.30  Rotation 90
    D129   Rectangle 105.30 X 132.30
    D130   Rectangle 108.66 X 144.09  Rotation 90
    D131   Round 92.91
    D132   Round 100.79
    D133   Rectangle 222.83 X 321.26
    D134   Rectangle 65.35 X 155.30  Rotation 90
    D135   Rectangle 40.30 X 44.30  Rotation 90
    D136   Rectangle 112.60 X 321.26  Rotation 90
    D137   Rectangle 61.42 X 124.41  Rotation 90
    D138   Rectangle 65.35 X 155.30
    D139   Bullet 124.41 X 65.35  Rotation 180
    D140   Round 124.41
    D141   Bullet 124.41 X 65.35
    D142   Rectangle 40.30 X 44.30
    D143   Rectangle 31.89 X 79.13  Rotation 90
    D144   Square 72.30
    D145   Round 72.30
    D146   Square 60.30
    D147   Round 60.30
    D148   Square 85.04
    D149   Round 85.04
    D150   Square 66.30
    D151   Round 71.26
    D152   Rectangle 57.48 X 69.29
    D153   Bullet 124.41 X 65.35  Rotation 90
    D154   Bullet 124.41 X 65.35  Rotation 270
    D155   Rectangle 45.30 X 73.30  Rotation 90
    D156   Square 92.91
    D157   Rectangle 85.04 X 203.15  Rotation 90
    D158   Rectangle 57.48 X 69.29  Rotation 90
    D159   Round 62.20
    D160   Round 38.19
    D161   Round 29.92

Gerber Output
=============

C:\Electronics\Manual Flow Control Board\Plots\Manual Flow Control Board 01 - Bottom Copper.gbr

    Layers:
    ------------------
    Bottom Copper
    Board Outlines

    D-Code Shape  (thou)
    -----------------------
    D11    Round 19.69
    D15    Round 5.00
    D26    Round 25.00
    D74    Round 86.61
    D86    Square 66.00
    D87    Round 66.00
    D88    Square 54.00
    D89    Round 54.00
    D90    Square 78.74
    D91    Round 78.74
    D92    Square 60.00
    D93    Round 64.96
    D101   Round 55.91
    D102   Round 50.00
    D103   Round 15.00
    D104   Round 31.89
    D105   Round 23.62

Gerber Output
=============

C:\Electronics\Manual Flow Control Board\Plots\Manual Flow Control Board 01 - Bottom Copper (Resist).gbr

    Layers:
    ------------------
    Bottom Copper
    Board Outlines

    D-Code Shape  (thou)
    -----------------------
    D10    Round 96.61
    D11    Round 104.49
    D12    Square 76.00
    D13    Round 76.00
    D14    Square 64.00
    D15    Round 64.00
    D16    Square 88.74
    D17    Round 88.74
    D18    Square 70.00
    D19    Round 74.96
    D70    Round 5.00

Gerber Output
=============

C:\Electronics\Manual Flow Control Board\Plots\Manual Flow Control Board 01 - Bottom Copper (Paste).gbr

    Layers:
    ------------------
    Bottom Copper
    Board Outlines

    D-Code Shape  (thou)
    -----------------------
    D70    Round 5.00

Gerber Output
=============

C:\Electronics\Manual Flow Control Board\Plots\Manual Flow Control Board 01 - Bottom Silkscreen.gbr

    Layers:
    ---------------------
    Bottom Silkscreen
    Board Outlines

    D-Code Shape  (thou)
    -----------------------
    D70    Round 5.00
    D71    Round 5.91
    D20    Round 3.94
    D21    Round 20.00
    D22    Round 6.00

NC Drill Output
===============

C:\Electronics\Manual Flow Control Board\Plots\Manual Flow Control Board 01 - Drill Data - [Through Hole].drl

    Output:
    ---------------------------
    Plated Round Drill Holes
    Plated Slots
    Plated Board Outlines

    Tool  Size         Count   ID
    ------------------------------------
    T001  000.41000 mm 43    AG
    T002  000.81000 mm 4     AE
    T003  000.90000 mm 20    P
    T004  000.96520 mm 12    AB
    T005  001.30000 mm 9     Q
    T006  001.40000 mm 8     X
    ------------------------------------
    Total              96
    ------------------------------------

C:\Electronics\Manual Flow Control Board\Plots\Manual Flow Control Board 01 - Drill Data - [Through Hole] (Unplated).drl

    Output:
    -----------------------------
    Unplated Round Drill Holes
    Unplated Slots
    Unplated Board Outlines

    Tool  Size         Count   ID
    ------------------------------------
    T001  000.63500 mm 1
    T002  002.40000 mm 1     Y
    ------------------------------------
    Total              2
    ------------------------------------


Gerber Output
=============

C:\Electronics\Manual Flow Control Board\Plots\Manual Flow Control Board 01 - Drill Ident Drawing - [Through Hole].gbr

    Layers:
    ------------------
    [Through Hole]
    Board Outlines


Drill Ident Drawing
===================

    Drill Plated Size Shape   ID
    -------------------------------------
    35    Y      59   Square  P
    51    Y      59   Diamond Q
    55    Y      100  Round   X
    94           100  Round   Y
    38    Y      100  Round   AB
    32    Y      100  Round   AE
    16    Y      100  Round   AG

    D-Code Shape  (thou)
    -----------------------------------
    D70    Round 5.00
    D23    Round 100.00
    D24    Square 59.06
    D25    Square 59.06  Rotation 45

End Of Report.
